c/w Grade 8.8 Bolt Galv M20x60mm Orbi Plate Galv Reid M20mm
by
Ramset
KP#:
ORB2020BGH
Description
OrbiPlate overcomes the major headache that comes with bolted cast-in connections – getting the holes to line up! The methods traditionally used to overcome this were time consuming, costly and often structurally inadequate. The patented OrbiPlate system is used when connecting steel to steel, or steel to concrete elements, and delivers connection tolerances of up to 20mm around the centre of the connection. It also provides the ability to achieve fine locational accuracy when positioning each steel member. OrbiPlate is quick and easy to install. The steel member is supplied to site with a pre-formed hole (70mm), which can be punched or cut at the centre of the connection location. The main washer is then placed over the hole, rotated to locate the slot over the ferrule, then secured using the class 8.8 bolt through the small washer. The bolt can be positioned anywhere along the elongated slot, providing up to 20mm tolerance in all directions. DescriptionOrbiPlate M16ORB2016BGHOrbiPlate M20ORB2020BGHOrbiPlate M20 Long BoltORB2020BLGH Before visiting a Stockist or Service Centre, contact them to ensure product availability.
Utilises readily available Reid™ Elephant Foot™ ferrules for steel to
Made from high tensile steel
Hot Dip Galvanised finishes
Comprises two washers (1x large, 1x small) and supplied with a M16 or M20
Capacity limited to either the ferrule cast into the concrete or the class
Item code: ORB2020BGH
Specifications
- Konnect Part ORB2020BGH
- Source Category Home > Bracing & Connections > Bolted Connections > OrbiPlate™
- Brand Ramset